| Document Number |
Revision |
Title |
| MSFC-HDBK-3575 |
baseline |
Outgassing Rate Measurements for the Screening of Nonmetallic Materials |
| MSFC-SPEC-494 |
Baseline |
Installation of Harness Assemblies (Electrical Wiring) Space Vehicle, General Specifications for |
| NASA-GB-8719.13 |
Baseline |
NASA SOFTWARE SAFETY GUIDEBOOK |
| NASA-HDBK-1001 |
Baseline |
TERRESTRIAL ENVIRONMENT (CLIMATIC) CRITERIA HANDBOOK FOR USE IN AEROSPACE VEHICLE DEVELOPMENT |
| NASA-HDBK-4001 |
Baseline |
ELECTRICAL GROUNDING ARCHITECTURE FOR UNMANNED SPACECRAFT |
| NASA-HDBK-4002 |
Baseline |
AVOIDING PROBLEMS CAUSED BY SPACECRAFT ON-ORBIT INTERNAL CHARGING EFFECTS |
| NASA-HDBK-4006 |
Baseline |
LOW EARTH ORBIT SPACECRAFT CHARGING DESIGN HANDBOOK |
| NASA-HDBK-5010 |
Baseline |
FRACTURE CONTROL IMPLEMENTATION HANDBOOK FOR PAYLOADS, EXPERIMENTS, AND SIMILAR HARDWARE |
| NASA-HDBK-6003 |
C |
APPLICATION OF DATA MATRIX IDENTIFICATION SYMBOLS TO AEROSPACE PARTS USING DIRECT PART MARKING METHODS/TECHNIQUES (Supersedes NASA-HDBK-6003B) |
| NASA-HDBK-6007 |
Baseline |
HANDBOOK FOR RECOMMENDED MATERIAL REMOVAL PROCESSES FOR ADVANCED CERAMIC TEST SPECIMENS AND COMPONENTS |
| NASA-HDBK-7004 |
B |
FORCE LIMITED VIBRATION TESTING |
| NASA-HDBK-7005 |
Baseline |
DYNAMIC ENVIRONMENTAL CRITERIA |
| NASA-HDBK-8719.14 |
BASELINE |
Handbook for Limiting Orbital Debris |
| NASA-HDBK-8739.18 |
BASELINE |
Procedural Handbook for NASA Program and Project Management of Problems, Nonconformances, and Anomalies |
| NASA-SPEC-5004 |
A |
WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
| NASA-STD-(I)-0007 |
Baseline |
NASA COMPUTER-AIDED DESIGN INTEROPERABILITY |
| NASA-STD-0005 |
Baseline |
NASA CONFIGURATION MANAGEMENT (CM) STANDARD |
| NASA-STD-2202 |
Baseline |
SOFTWARE FORMAL INSPECTIONS STANDARD |
| NASA-STD-2202-93 |
BASELINE |
SOFTWARE FORMAL INSPECTIONS STANDARD |
| NASA-STD-2818 |
Ver. 2.0 |
DIGITAL TELEVISION STANDARDS FOR NASA |
| NASA-STD-3000 VOL I |
B |
MAN-SYSTEMS INTEGRATION STANDARDS - VOL I |
| NASA-STD-3000 VOL II |
B |
MAN-SYSTEMS INTEGRATION STANDARDS - VOL II |
| NASA-STD-3000 VOL III |
Baseline |
MAN-SYSTEMS INTEGRATION STANDARDS - VOL III |
| NASA-STD-3001, Volume 1 |
Baseline |
NASA SPACE FLIGHT HUMAN SYSTEM STANDARD - VOLUME 1: CREW HEALTH (Superseding NASA-STD-3000, Volume 1, Chapter 7; and JSC 26882, Space Flight Health Requirements Document) |
| NASA-STD-4003 |
Baseline |
ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT |
| NASA-STD-4005 |
Baseline |
LOW EARTH ORBIT SPACECRAFT CHARGING DESIGN STANDARD (Supersedes NASA-STD-(I)-4005) |
| NASA-STD-5001 |
A |
STRUCTURAL DESIGN AND TEST FACTORS OF SAFETY FOR SPACEFLIGHT HARDWARE |
| NASA-STD-5002 |
Baseline |
LOAD ANALYSES OF SPACECRAFT AND PAYLOADS |
| NASA-STD-5003 |
Baseline |
FRACTURE CONTROL REQUIREMENTS FOR PAYLOADS USING THE SPACE SHUTTLE |
| NASA-STD-5005 |
C |
STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA-STD-5006 |
Baseline |
GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS USED IN FLIGHT HARDWARE |
| NASA-STD-5007 |
Baseline |
GENERAL FRACTURE CONTROL REQUIREMENTS FOR MANNED SPACEFLIGHT SYSTEMS |
| NASA-STD-5008 |
A |
PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| NASA-STD-5009 |
Baseline |
NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE CRITICAL METALLIC COMPONENTS |
| NASA-STD-5012 |
Baseline |
STRENGTH AND LIFE ASSESSMENT REQUIREMENTS FOR LIQUID FUELED SPACE PROPULSION SYSTEM ENGINES |
| NASA-STD-5017 |
Baseline |
DESIGN AND DEVELOPMENT REQUIREMENTS FOR MECHANISMS |
| NASA-STD-5019 |
Baseline |
FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE (Superseding NASA-STD-(I)-5019 (Interim) and NASA-STD-5007) |
| NASA-STD-6002 |
D |
APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS (Superseding NASA-STD-6002C) |
| NASA-STD-6008 |
Baseline |
NASA FASTENER PROCUREMENT, RECEIVING INSPECTION, AND STORAGE PRACTICES FOR SPACEFLIGHT HARDWARE |
| NASA-STD-6016 |
Baseline |
STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA-STD-7001 |
Baseline |
PAYLOAD VIBROACOUSTIC TEST CRITERIA |
| NASA-STD-7002 |
A |
PAYLOAD TEST REQUIREMENTS |
| NASA-STD-7003 |
Baseline |
PYROSHOCK TEST CRITERIA |
| NASA-STD-7009 |
Baseline |
STANDARD FOR MODELS AND SIMULATIONS |
| NASA-STD-8709.2 |
Baseline |
NASA SAFETY AND MISSION ASSURANCE ROLES AND RESPONSIBILITIES FOR EXPENDABLE LAUNCH VEHICLE SERVICES ; Revalidated/Reaffirmed 08/21/2003 |
| NASA-STD-8719.10 |
Baseline |
Standard for Underwater Facility and Non-Open Water Operations |
| NASA-STD-8719.11 |
A |
SAFETY STANDARD FOR FIRE PROTECTION |
| NASA-STD-8719.13 |
B |
NASA SOFTWARE SAFETY STANDARD (Rev B w/ Ch1 of 7/8/2004) |
| NASA-STD-8719.17 |
Initial |
NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PV/S) |
| NASA-STD-8719.7 |
Baseline |
FACILITY SYSTEM SAFETY GUIDEBOOK |
| NASA-STD-8719.9 |
Baseline |
STANDARD FOR LIFTING DEVICES AND EQUIPMENT; Revalidated/Reaffirmed 10/01/2007 |
| NASA-STD-8729.1 |
Baseline |
PLANNING, DEVELOPING AND MANAGING AN EFFECTIVE RELIABILITY AND MAINTAINABILITY (R&M) PROGRAM |
| NASA-STD-8739.1 |
A |
WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES (Revision A with Change 1 of 7/23/09) |
| NASA-STD-8739.2 |
Baseline |
WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY (Baseline with Ch 1 of 6/6/08) ; Revalidated/Reaffirmed 06/05/2008 |
| NASA-STD-8739.3 |
Baseline (Change 3) |
SOLDERED ELECTRICAL CONNECTIONS (Baseline with Ch 3 of 6/6/08) |
| NASA-STD-8739.4 |
Base |
CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING (Baseline w/ CH 4 of 7/25/08) |
| NASA-STD-8739.5 w/Ch1 |
Baseline |
FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION |
| NASA-STD-8739.8 |
Baseline |
SOFTWARE ASSURANCE STANDARD (Baseline w/ Ch 1 of 5/5/05) |
| NSS-1740.12 |
Baseline |
SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| NSS-1740.14 |
Baseline |
NASA SAFETY STANDARD GUIDELINES AND ASSESSMENT PROCEDURES FOR LIMITING ORBITAL DEBRIS |
